2nz Fe Ecu Pinout Pdf 186 Portable ✪ 〈VALIDATED〉

| Function | Typical Pin Description | Importance | | :--- | :--- | :--- | | | Often Pin 1 or dedicated power pin | Supplies constant 12V to keep ECU memory alive. | | Ignition Switch (IGSW) | Dedicated switched 12V | Wakes the ECU when the key is turned on. | | Ground (E1/E2) | Case ground/Pin ground | Essential for sensor return paths and ECU operation. | | Injectors | Pins #10, #20, #30, #40 | Drivers that pulse the fuel injectors. | | Coil Packs (IGT/IGF) | IGT (Trigger) / IGF (Confirm) | Controls the firing of the spark plugs. | | VVT-i Oil Control Valve | Dedicated output pin | Controls variable valve timing solenoid. | | Throttle Position Sensor | VTA, VTA2, VC | Vital for "Drive-by-Wire" systems found on later 2NZ-FE models. | | Check Engine Light (MIL) | Dedicated output pin | Used to flash diagnostic codes. |