The latest firmware for the (Version 1.28) was released in November 2021. While Onkyo hasn't issued major feature updates recently, keeping your receiver current is essential for fixing streaming bugs and maintaining network stability. 🛠️ Update Highlights
| Issue | Likely Cause | Solution | |--------|---------------|-----------| | “Update via NET” greyed out | No network connection or server down | Use USB method instead | | Update freezes at 0% or 99% | Corrupt download or power glitch | Power cycle (unplug 1 min), retry via USB | | “USB device not supported” | Wrong format or folder structure | FAT32; root must contain HTR695 folder | | Receiver doesn’t recognize USB | Drive too large or high power draw | Try 4GB USB 2.0 drive | | After update, no sound | Settings reset to defaults | Re-run AccuEQ, check speaker config | | HDMI ARC stopped working | CEC/ARC settings reset | Turn off all devices → Enable HDMI CEC + ARC in setup | | Wi-Fi credentials lost | Update clears network settings | Re-enter Wi-Fi password | onkyo ht-r695 firmware update
This is the simplest method if your receiver is connected to the internet via Ethernet or Wi-Fi. on the remote or front panel. Navigate to 7. Miscellaneous Firmware Update Update via NET to begin. The display will show "Completed!" once finished. On/Standby on the unit to power down and finalize the installation. 2. USB Update The latest firmware for the (Version 1
After updating the firmware, verify that the new version is installed correctly: on the remote or front panel
: After turning the unit on, wait at least 20–60 seconds for the system to fully initialize before navigating to the update menu. Method 1: Update via Network (Recommended)