Simco Fmx002 Manual Full Upd «2025»

Point the sensor toward an uncharged area (away from the target). Press the gray ZERO button once or twice until the display reads

This is the section most users misinterpret. The explains the 25mm distance rule . The two LED guide lights on the front converge into a single dot when the sensor is exactly 25mm (1 inch) from the target surface. simco fmx002 manual full

The fieldmeter must be grounded through the operator or a dedicated ground lead to ensure user safety and measurement accuracy. Point the sensor toward an uncharged area (away

Point the sensor toward an uncharged area (or a grounded metal plate) and press the ZERO button. The display should read "0.00". Taking a Measurement: Move the sensor toward the object you want to test. Stop when the LED guide lights overlap. The two LED guide lights on the front

Always store the device in its protective carrying case to prevent mechanical shock, which can permanently damage the sensor.

No. Do not use in explosive gas or dust environments.