: Once admin access is restored, you can navigate to System > Data Mgt > Factory Reset on the device screen to wipe all data. Method 2: Resetting the Admin Password (Manual)
Always remember to before resetting. With this guide, you can confidently perform a factory reset on any ZKTeco UA300 model, minimizing downtime and keeping your access control system running smoothly. zkteco ua300 factory reset
Confirm the operation. The device will typically reboot, and all user data and settings (except for the log) will be cleared. 2. Reset via Software (ZKTime / ZKAccess) : Once admin access is restored, you can
For some firmware versions, you can generate a "Super Password" based on the device's system time. Confirm the operation
When it asks for a password, enter the 8-digit result from your calculation (e.g., ) and press Clear Admin : Once inside, go to Advanced Settings and select Clear Admin Initialize fingerprintdubai.com
| Symptom | Likely Cause | Fix | |-----------------------------|----------------------------------|---------------------------------------------| | Still asks for password | Reset incomplete / wrong jumper | Repeat hardware method, ensure short timing | | No network connection | Static IP reset | Reconfigure IP to match your LAN subnet | | USB not recognized | Driver not installed | Install ZK USB driver (Silicon Labs CP210x) | | Data lost | Expected | Re-enroll users and reconfigure rules |